Product Reviews

SMALLRIG 4382 Universal Phone Holder Mount Review

A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for a light or microphone.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review is for creators who want to add a smartphone to a camera or tripod setup and adjust its orientation without changing mounts.

Its clamp fits a range of phone widths and adds accessory attachment points, with a 500 g maximum load capacity to keep in mind.

SMALLRIG 4382 Mount Review Summary

The quick verdict

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for a light or microphone.

  • Adjustable clamp accommodates smartphones 57–88 mm wide.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.
  • Bottom mounting options include a 1/4-inch-20 threaded hole and a cold shoe.

Pros

  • Fits a broad range of phone widths, subject to checking the device’s measurement.
  • Portrait and landscape switching helps adapt framing to different recording formats.

Consider before buying

  • The 500 g maximum load capacity needs to accommodate the phone and any added load.
  • The package includes only the holder, so a compatible camera, tripod or other support must be supplied separately.
Read the full review summary

The SMALLRIG 4382 combines a phone clamp, two rotating joints and mounting interfaces in a compact holder.

A 1/4-inch-20 threaded hole and a cold shoe at the bottom let it attach to compatible camera or tripod setups, while a cold shoe on top provides a place for a light or microphone.

Its 57–88 mm width range gives it broad phone compatibility, and the holder can switch between portrait and landscape orientation with a lock at 90 degrees.

It is a practical choice for mobile photography, vlogging, interviews or live streams when adjustable framing and accessory expansion matter. The package includes the holder only, so plan separately for a compatible support and any accessories.

The buying factors

SMALLRIG 4382 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Phone width range

The 57–88 mm clamp range covers a useful range of smartphone widths, though buyers should check their device’s width.

8/10

Orientation flexibility

Landscape and portrait switching, a 90-degree lock and two rotating joints support varied framing.

8/10

Mounting options

A bottom 1/4-inch-20 threaded hole and cold shoe accommodate compatible camera and tripod setups.

8/10

Accessory expansion

The top cold shoe and threaded holes support attaching accessories such as a light, microphone or compatible power bank holder.

6/10

Load capacity

The stated maximum is 500 g, which sets a clear limit for the mounted phone and any attached load.

8/10

Carry-friendly size

At 73 g and about 4.06 × 1.63 × 1.23 inches, the holder is a small addition to a kit.

Key Features and Specifications of SMALLRIG 4382 Mount

  • Adjustable clamp accommodates smartphones 57–88 mm wide.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.
  • Bottom mounting options include a 1/4-inch-20 threaded hole and a cold shoe.
  • Top cold shoe and spaced threaded holes provide accessory mounting points.
  • Maximum load capacity is 500 g; the holder weighs 73 g.
  • Package includes one phone holder.

Pros and Cons of SMALLRIG 4382 Mount

Pros

  • Fits a broad range of phone widths, subject to checking the device’s measurement.
  • Portrait and landscape switching helps adapt framing to different recording formats.
  • Combines camera or tripod attachment with a top cold shoe for an accessory.
  • Low listed weight and compact dimensions suit a portable setup.

Consider before buying

  • The 500 g maximum load capacity needs to accommodate the phone and any added load.
  • The package includes only the holder, so a compatible camera, tripod or other support must be supplied separately.
  • Buyers with phones outside the 57–88 mm width range will need a different holder.

Who Should Buy SMALLRIG 4382 Mount?

Good fit

Consider the SMALLRIG 4382 if you want one holder that can move between a compatible camera or tripod and support both portrait and landscape framing.

The two rotating joints offer positioning options, while the 90-degree lock gives a defined orientation change.

It is especially useful when you want to mount a light or microphone on the top cold shoe, or build around the threaded holes for compatible accessories.

Before choosing it, measure the phone’s width and account for the combined load of the phone and anything mounted with the holder against the 500 g maximum.

Who should skip it

Skip this design if your phone is narrower than 57 mm or wider than 88 mm, or if your intended setup would exceed the 500 g capacity.

Also look elsewhere if you need a complete phone-and-tripod kit: this package contains the holder only.

How the SMALLRIG 4382 Mount fits a mobile recording setup

A clamp for varied phone sizes

The 57–88 mm width range accommodates many smartphones, but width is the useful compatibility check here. Measure the phone in the configuration you plan to mount, including its case if you will keep the case on.

This avoids assuming that a model name alone guarantees fit.

Orientation changes and positioning

The holder supports both portrait and landscape modes and locks when rotated 90 degrees. Two rotary joints provide up to 180 degrees of adjustment, which can help position the screen for different framing needs.

These adjustments are most useful when the phone is part of a fixed camera or tripod setup and you want to change the composition without repositioning the whole support.

Mounting and expanding the rig

The bottom 1/4-inch-20 threaded hole and cold shoe offer two ways to attach the holder to compatible equipment.

A separate cold shoe on top creates an accessory point for a light or microphone, while the spaced threaded holes are designed for compatible power bank holders.

Check the mounting interface of the gear you plan to use before building around it.

Keep the total load in range

The maximum load capacity is 500 g, so account for the phone and any added load in the mounted arrangement.

The holder itself weighs 73 g and measures about 4.06 × 1.63 × 1.23 inches, giving it a compact footprint. Those dimensions help with packing, but the support and accessory arrangement still need to suit your intended setup.

Alternatives to SMALLRIG 4382 Mount

Cell Phone Camera Mounts alternative

SMALLRIG 5156 Magnetic Metal Phone Mount
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG 5156 Magnetic Metal Phone Mount

Choose the 4382 if you want a width-adjustable clamp for a range of phones.

Consider the 5156 if you use a compatible MagSafe iPhone and prefer magnetic attachment; its mounting approach suits a different phone setup, and its description notes that external impacts may cause the device to detach.

  • The 5156 uses a magnetic mount designed for iPhone models with MagSafe functionality.
  • It also has dual rotating shafts, a bottom threaded hole and cold shoe, and a detachable top round plate that can serve as a mounting plate for accessories.
  • The 4382 uses an adjustable clamp for phones 57–88 mm wide and offers a bottom threaded hole and cold shoe.

Is SMALLRIG 4382 Mount Worth It?

The SMALLRIG 4382 Universal Phone Holder Mount is worth considering for mobile creators who need flexible phone positioning, portrait and landscape switching, and accessory mounting in a compact holder.

Its adjustable width range and multiple interfaces make it adaptable to compatible recording setups.

Check your phone’s width, the mounting interface on your support, and the total load before buying. The 500 g maximum and holder-only package are the key practical limits to account for.

Your review at a glance

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for a light or microphone.

  • Adjustable clamp accommodates smartphones 57–88 mm wide.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.
  • Bottom mounting options include a 1/4-inch-20 threaded hole and a cold shoe.

Written by

granvilleislandworks.com Editorial Team

Editorial team

granvilleislandworks.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 4382 Universal Phone Holder Mount

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for a light or microphone.

  • Adjustable clamp accommodates smartphones 57–88 mm wide.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
Check Video Reviews on Amazon