The SmallRig 1138 camera clamp review is for creators who need a flexible way to place a small camera accessory without drilling into a support surface.
Its clamp, dual ball head, and included action-camera adapter make it useful for compact setups, subject to a 1.5 kg maximum load.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp-and-ball-head mount for creators who need to attach a light camera accessory to a rod, table, frame, or similar support.
- Clamp-and-ball-head assembly with a 1/4-inch-20 screw for compatible accessories.
- Mounting options include rods, tubes, tables, frames, and tripods; no drilling is required.
- Specified maximum load: up to 1.5 kg.
- Aluminum and stainless steel construction.
Pros
- Combines a support clamp, adjustable dual ball head, and common 1/4-inch-20 connection.
- Can attach to several kinds of supports without drilling.
Consider before buying
- The 1.5 kg maximum load limits suitability for heavier cameras and accessories.
- Dynamic use calls for a separately attached safety rope, adding a setup step.
Read the full review summary
SmallRig 1138 combines a super clamp with a dual ball head and a 1/4-inch-20 screw, letting you attach compatible cameras, monitors, lights, microphones, webcams, or other gear to a rod, tube, table, frame, or tripod.
The locking knob secures the clamp to the support, while the ball-head arrangement allows angle adjustment. An action-camera adapter is included for compatible cameras.
Its appeal is a compact mounting point for desks, vehicle interiors, or other supports where a conventional tripod is inconvenient.
The stated maximum load is 1.5 kg, so it is best considered for relatively light accessories and a steady setup.
For dynamic use, the product information advises attaching a safety rope; buyers should also confirm that the clamp can grip their chosen support securely.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is described for rods, tubes, tables, frames, and tripods, with a 1/4-inch-20 screw and an action-camera adapter.
Angle adjustment
A dual ball-head design supports positioning the mounted accessory, though no range of motion is specified.
Load suitability
A 1.5 kg maximum is useful for lighter gear but narrows the fit for heavier accessories.
Setup convenience
The locking knob and no-drill clamping approach suit quick placement on compatible supports.
Build materials
Aluminum and stainless steel are specified for the clamp assembly.
Dynamic-use readiness
The maker calls for a safety rope in dynamic scenarios, so moving setups need added care.
Key Features and Specifications of SmallRig 1138 Clamp
- Clamp-and-ball-head assembly with a 1/4-inch-20 screw for compatible accessories.
- Mounting options include rods, tubes, tables, frames, and tripods; no drilling is required.
- Specified maximum load: up to 1.5 kg.
- Aluminum and stainless steel construction.
- An action-camera mount adapter is included.
- Approximate dimensions are 3.74 × 3.35 × 0.98 inches, with a listed weight of 0.2 kg.
- The supplied package description lists one super camera clamp and one action-camera mount adapter.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a support clamp, adjustable dual ball head, and common 1/4-inch-20 connection.
- Can attach to several kinds of supports without drilling.
- Includes an action-camera adapter for compatible camera setups.
- Uses aluminum and stainless steel in the assembly.
Consider before buying
- The 1.5 kg maximum load limits suitability for heavier cameras and accessories.
- Dynamic use calls for a separately attached safety rope, adding a setup step.
- The product data does not specify the clamp jaw range, so check that your support fits before buying.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the 1138 if you need to position a lightweight camera accessory on a desk edge, rod, tube, frame, or similar support and want to adjust its angle after clamping.
The included action-camera adapter may also be useful if that is part of your setup. Before choosing it, compare your complete mounted load with the 1.5 kg maximum and confirm that the clamp can fit the intended support.
It makes the most sense for a stationary or carefully secured creator setup where a small mount can solve a specific placement problem.
For a moving rig, follow the safety-rope guidance and check that the attachment points remain secure throughout use.
Who should skip it
Look elsewhere if your planned camera and accessories exceed the 1.5 kg maximum or need a mount designed around a heavier payload.
This is a poor fit if your support surface cannot be confirmed as compatible with the clamp, or if you need to use the mount dynamically without adding a safety rope.
How the SmallRig 1138 Clamp Fits a Compact Rig
Support choice matters
The clamp format can place a camera accessory on a support that would not accept a standard tripod.
Since the jaw range is not specified here, measure the support at the exact attachment point and compare it with the clamp before relying on a fit.
Keep the payload modest
The stated maximum load is 1.5 kg. Treat that as a ceiling for the complete mounted accessory and consider how the support and positioning affect your setup; the figure alone does not establish performance in every orientation.
Angle adjustment with a safety step
The dual ball head is intended to help orient the attached gear, while a locking knob secures the clamp.
For dynamic scenarios, the product guidance specifically calls for a safety rope, so plan an appropriate tether and attachment point if the setup may move.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 when its compact clamp-and-ball-head arrangement and included action-camera adapter suit the rig. The 2732 is a better match if you need a longer arm, specified clamp-opening dimensions, and both 1/4-inch and 3/8-inch clamp threads.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm.
- It offers 1/4-inch and 3/8-inch clamp threads, a clamp opening range of 15–54 mm, and rubber cushions on the clamp and arm.
- The SmallRig 1138 combines a clamp and dual ball head, includes an action-camera adapter, and has a stated 1.5 kg maximum load.
Camera Mounts & Clamps alternative

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp 735-SR
The 1138 suits buyers who want a ball head and action-camera adapter as part of the mount.
Consider the 735-SR if you want a clamp with specified jaw dimensions and threaded attachment points, and prefer to choose a separate accessory for positioning.
- The 735-SR is a clamp-only option with 1/4-inch and 3/8-inch threaded holes, rubber pads, and a jaw range of 15–40 mm. Its maximum weight recommendation is 3.3 pounds.
- The SmallRig 1138 includes a dual ball head and action-camera adapter, and its stated maximum load is 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for a compact, adjustable mounting point for lightweight cameras and accessories on compatible supports.
Its clamp, dual ball head, common screw connection, and included action-camera adapter make a flexible package for small creator rigs.
Check the support fit and keep the complete load within the 1.5 kg maximum.
If the setup will move, include the recommended safety rope; buyers needing a longer arm or a clamp with a specified jaw range may prefer a different configuration.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp-and-ball-head mount for creators who need to attach a light camera accessory to a rod, table, frame, or similar support.
- Clamp-and-ball-head assembly with a 1/4-inch-20 screw for compatible accessories.
- Mounting options include rods, tubes, tables, frames, and tripods; no drilling is required.
- Specified maximum load: up to 1.5 kg.
- Aluminum and stainless steel construction.